UNOCART-2600 SD card Multi Rom Cartridge for ATARI 2600
The UNOCART-2600 is an Atari cartridge emulator. It supports cartridges with up to 64k of ROM and 32k of RAM. Original project by Robin Edwards.The enclosure is high-quality 3D printed using PETG material. If you need the product without the enclosure, you can order it in our store.Work with original Atari 2600 series (doesn't work with the new Atari 2600+ console.)
FirmwareThe cartridge is flashed with the original firmware Ver 1.05
Quick StartFormat SD card to FAT32, copy BIN, ROM or A26 files to an SD card and insert it into the cartridge. With models up to 32GB capacity working without problems. May not work with larger capacity and high speed cards!Firmware will only show up to 80 items per directory. You can use directories to organize your files.Check the TV configuration jumper on the back of the board matches your TV system. Insert the cartridge in the Atari 2600. If the board is uncased, make sure the cartridge is inserted correctly, inscription THIS SIDE FRONT.Power on the Atari and use the joystick to choose an item and the fire button to start it.
PAL/NTSC ConfigurationTV system setup is done via the screen menu. (Ver 1.05 switch optional)Note that this setup only applies to the cartridge menu (and also to the Supercharger BIOS if you are using a Supercharger cartridge type). Once you select a ROM to emulate, the TV picture produced will be entirely dependent on the cartridge being emulated.
MenuMenu allows you to navigate the files on the card and select a title to use. Joystick up and down will move through the items one at a time. You can also use joystick left and right to move to the previous or next page. Press fire to select an item. You can also use the SELECT button on the console to move to the next item, and RESET to select an item, if you don’t have a joystick plugged in.
CompatibilityThe UNOCART-2600 should be able to emulate every cartridge released during the commercial life of the 2600. Newer homebrew titles should also be compatible with the UNOCART-2600, unless they use the DPC+ co-processor features specific to the Harmony/Melody cartridge. Note that the DPC support on the cartridge is not complete butit is sufficient to play Pitfall II.Arcadia/Starpath Supercharger titles are emulated with the multi-load parts combined in a single file. Up to 256 loads are supported (2MB file). The Supercharger BIOS will use the TV type set by the UNOCART-2600 TV jumper.Work with 7800 console, but only 2600 games supported.Doesn't work with the new emulator Atari 2600+ console.
ROM FilesThe UnoCart uses cartridge detection signatures from the Stella Atari 2600 emulator to auto-detect all common cartridge types. If a file has an extension of .BIN, .ROM or .A26 it will be auto-detected. If you want to force thecartridge to be emulated as a specific type, you can use the file extensions listed in the table below.
In our products we use only original processors STM, from authorized sellers.
LOT - 1pcs ATARI 2600 with Case.If you need a cartridge in a case, you can purchase this option in our store, see another lot.We also developed a case for a cartridge that can be printed on a 3D printer, go to the retro-spektro site to download the model.

ATTENTION - ATARI 2600, 3D Printed Cartridge Case not uncluded !!!

If you buy more than 1 of my item, I will do combined shipping and reduce the shipping cost.
Every device is fully tested on original hardware before shipping and carefully packed.Retro computers and vintage peripherals are over 30–40 years old. Correct operation of accessories depends on the condition of the original computer.If you have any questions or experience any difficulty after receiving your order, please contact me first. I am always happy to help with installation, setup or troubleshooting.Thank you for your purchase and for supporting classic computing!
IMPORTANT INFORMATIONInternational shipments may require additional time due to customs inspection or local postal processing. Delivery times are outside the seller's control.Tracking is provided and will remain active until delivery. In some cases, tracking updates may be delayed while the item is being processed by customs or the local carrier.If you have any questions about your shipment, please feel free to contact us before opening a case.
EU buyers:From July 2026, some EU countries may collect additional import, customs clearance, postal handling or newly introduced EU customs fees upon delivery, even if VAT has already been collected by . These charges are determined by the destination country and are not controlled by the seller.If collected VAT during checkout and your local customs or postal service requested an additional payment, please contact Customer Support or your local postal service for clarification, as the seller does not receive these payments.
ALL ITEMS ARE WELL PACKED TO AVOID DAMAGE DURING SHIPPING.ALL GOODS ARE SHIPPED BY REGISTERED MAIL WITH A TRACKING NUMBER.