Features:
1. Support maximun capacity up to 2x16TB.
2. Support UASP accelerated transfer protocol.
3. Automatic replication of HDD or SSD (clones from Source Disk A to Target Disk B) at a click of the button.
4. Use the dedicated DC power adapter certified by PSE.
5. Plug and play. No software, drivers or complicated installation required.

Instructions on How to Connect the Dock to the Computer:
1). Please unplug the DC power adapter to make sure that the power is off before starting.
2). Insert HDDs/SSDs into the slots vertically and slowly until them stick.(One HDD/SSD is also supported)
3). Connect the power adapter and turn the "ON-OFF" switch on.
4). Connect the USB cable to the computer then you can use it as your computer's external hard drive.

How to Operate Offline Clone Function:
ѧ Please unplug the DC power adapter to make sure that the power is off before starting.
ѧ Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
ѧ Make sure the USB cable is disconnected from computer.
ѧ Connect the power adapter and turn the"ON-OFF" switch on.
ѧ Hold the CLONE button for about 3 seconds, when all leds turn on, the clone progress will start.
ѧ Four lights (25%, 50%, 75%, 100% ) will turn solid blue when the cloning process is completed.
ѧ Finally turn the "ON-OFF" switch off, disconnect the power adapter and eject your drives.

Tips for Offline Clone:
- The capacity of target disk must be larger than the source disk.
- Please confirm that your source drive and target drive can both work properly.
- Please connect the 12V power adapter to ensure a stable power supply for transmission.
- To avoid data transfer errors, overheating and damage to the device, please make sure that there are no faulty driver cells.
- To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the dock before removing.
- Please confirm the target drive have no data. If you have existing data on the target drive, the cloning process will
eliminate your target drive's data. Because the target drive will be cloned to be the same as the source drive, partition, format
and data are the same too.

What you will get:

1 x USB 3.0 Dual Bay Docking Station

1 x USB-B to USB-A Cable

1x Power Adapter 12V/3A

1 x USB-A to USB-C Adapter

1 x Quick Start Guide

1-Year worry-free warranty (extra 6 months for registered members) and
life-long friendly customer service and technical support.

2-Bay, 4 RAID Modes, 44TB, with Cooling Fans, USB-C 3.2

WAVLINK USB3.2 to 2-Bay SATA HDD/SSD Tray Docking Station or Enclosure
The WAVLINK 2-bay SATA hard drive/SSD enclosure is the ultimate solution for professionals who
demand high-speed data transfer, large storage capacity, and reliable performance. Ideal for gamers,
content creators, and corporate professionals, this docking station combines advanced technology with user-friendly features.

Ideal For
Gamers: Expand your game library and access your games faster with
the high-speed USB 3.2 interface.
Content Creators: Store and manage large multimedia files effortlessly with
ample storage capacity and reliable data transfer speeds.
Corporate Professionals: Efficiently manage and back up critical business data with
hot-swappable convenience and robust connectivity options.

Speed and Performance
Harness the power of USB 3.2 Type-C with up to 10Gbps transfer speeds, reducing wait times for large file transfers and backups.

Versatility and Expansion
Four SATA 6Gbit/s bays support up to 2 drives of 22TB each, providing unparalleled
flexibility for expanding your storage requirements.

4 RAID Modes
This 2 bay RAID storage enclosure allows you to switch drives effortlessly using the mode switch,
enabling smooth storage expansion and performance adjustments for your specific needs.

Intelligent Cooling System
High-quality aluminum construction provides excellent heat dissipation.
The cooling system runs automatically over 48°C.

Easier Device Management
Enabling hot-swappable drives enables flexible hard disk swapping without requiring host shutdowns,
streamlining your workflow and enhancing productivity. Moreover, supporting computer-linked control,
synchronized with the computer to switch on and off.

Auto-Sleep Mode
Automatically entering sleep mode after 15 minutes of no operation, effectively conserving energy and extending product lifespan.

HDD Installation Steps
Step 1: Remove the brackets.
Step 2: Place HDD 1&2 into the brackets and secure them.
Step 3: Reinstall the brackets.
Step 4: Tighten the screws on the bottom.

Compatibility Notes
Systems: Windows, Mac OS, Chrome OS, Linux, Android, iOS, Harmony OS, iPad OS;
Host: Computers/phones/tablets with a USB-C/USB-A port;
HDD/SSD: 3.5" and 2.5'' SATA HDD/SSD. For 2.5'' hard drives, additional 2.5'' to 3.5'' mounting brackets are required(Not WL-RapidFire H2R
2.Unit Size: to C/USB-C to A Cable Length: 80cm/31.5in
Power Adapter Cable Length: 120cm/47.2in
4.Unit Weight: 581g/20.5oz
5.Housing Material: Aluminum Alloy
6.Power LED: Blue
HDD LED: White
RAID LED: Blue

Key Features
- One USB-C upstream port transfers speed up to 10Gbps, and is compatible with USB 3.2/3.1/2.0 computers.
- Dual 3.5" SATA HDD for massive storage capacity expansion.
- RAID 0/1/Large/Normal mode for the data of backup, read and write, and other different needs.
- Supports computer-linked control, with synchronized power on and off for the computer.
- Supports multi-disk daisy-chaining, creating a multi-disk, multi-device, multi-task workstation.
- Thickened aluminum panel, low-noise temperature-controlled fan, and honeycomb ventilation holes for efficient heat dissipation.

In the Box
- 1 x Dual Bay USB-C 3.5"SATA HDD Enclosure
- 1 x Power Adapter
- 2 x Screwdriver
- 1 x USB-C to USB-C Cable
- 1 x USB-C to USB-A Cable
- 1 x Quick Start Guide
- Several Screws

Warm Tips:
- Be sure to make a backup of your data before you set/reset the RAID mode, otherwise your data will be lost.
- The performance will be limited if the host USB-C port standard is lower than USB3.2 Gen2x2.
- For 2.5'' hard drives, additional 2.5'' to 3.5'' mounting brackets are required (Not included).
- Connect up to 3 products via Daisy Chain.
- Supports auto-sleep function, automatically sleeps after 15 minutes of no operation.
- When installing the hard disk, use screws for better stability.
- If the SSD is brand-new and unformatted, please perform partition installation so that the computer can read
the data normally. If the SSD is formatted and has stored data, you have no need to perform partition
installation because the computer can read the data normally.

4-Bay, 4K HDMI Port, 88TB, with Cooling Fans, USB-C 3.2

WAVLINK USB3.2 to 4-Bay SATA HDD/SSD Tray Docking Station or Enclosure
The WAVLINK 4-bay SATA hard drive/SSD enclosure is the ultimate solution for professionals who
demand high-speed data transfer, large storage capacity, and reliable performance. Ideal for gamers,
content creators, and corporate professionals, this docking station combines advanced technology with user-friendly features.

Ideal For
Gamers: Expand your game library and access your games faster with the high-speed USB 3.2 interface.
Content Creators: Store and manage large multimedia files effortlessly with ample storage capacity
and reliable data transfer speeds.
Corporate Professionals: Safely store and back up important business data with independent power control and rich connection ports.

Speed and Performance
Harness the power of USB 3.2 Type-C with up to 10Gbps transfer speeds,
reducing wait times for large file transfers and backups.

Versatility and Expansion
Four SATA 6Gbit/s bays support up to 4 drives of 22TB each, providing unparalleled flexibility for expanding your storage requirements.

High-Resolution Display
The HDMI interface supports 4K resolution, perfect for professional setups requiring high-quality external displays.

Intelligent Cooling System
High-quality aluminum construction provides excellent heat dissipation. The cooling system runs automatically over 48°C.

User-Friendly Design
Separate ON/OFF power switches are fitted for each bay for independent power management.
Extra USB 3.2 Type-C port and HDMI output enrich your connection choices.

Auto-Sleep Mode
Automatically entering sleep mode after 15 minutes of no operation, effectively conserving energy and extending product lifespan.

HDD Installation Steps
Step 1: Remove the brackets.
Step 2: Place HDD 1&2, 3&4 into the brackets.
Step 3: Secure the brackets together.
Step 4: Reinstall the brackets.
Step 5: Tighten the screws on the bottom.

Compatibility Notes
Systems: Windows, Mac OS, Linux, Android, iOS, Harmony OS, iPad OS;
Host: Computers/Phones/Tablets with a USB-C/USB-A port;(Please ensure the USB-C port on your
host supports video output and use the USB-C to C cable, or the HDMI port will not work.)
HDD/SSD: 3.5" and 2.5'' SATA HDD/SSD. For 2.5'' hard drives, additional 2.5'' to 3.5'' mounting brackets are required(Not WL-RapidFire H4
2.Unit Size: to C/USB-C to A Cable Length: 80cm/31.5in
Power Adapter Cable Length(plug end): 120cm/47.2in
Power Adapter Cable Length (round port end): 120cm/47.2in
4.Unit Weight: 1100g/38.8oz
5.Housing Material: Aluminum Alloy
6.Power LED: Blue
HDD LED: White
Power Adapter LED: Green

Key Features
● USB 3.2 Type-C Port: Achieve data transfer rates up to 10Gbps, enabling quick and
efficient file transfers and backups.
● Four SATA Bays: Supports up to four 3.5'' or 2.5'' hard drives or SSDs with SATA 6Gbit/s interface,
providing vast storage options for your data-intensive tasks.
● Premium Aluminum Construction: Ensures excellent heat dissipation and durability,
safeguarding your drives against overheating and physical damage.
● Independent Power Control Design: Featured with four separate ON/OFF power switches to control each drive separately.
● Cooling Fans: Dual fans automatically engage at 48°C, ensuring your drives operate within optimal
temperature ranges for enhanced performance and longevity.
● Additional USB 3.2 Type-C Interface: Connect USB peripherals or Daisy-chain additional devices with ease.
● HDMI Output: Supports up to 4K@60Hz resolution for high-quality video output to external displays,
enhancing your workstation setup.

In the Box
-1x Quad Bay 3.5" SATA HDD Enclosure
-1 x USB-C to USB-C Cable
-1 x USB-C to USB-A Cable
-1 x Power Adapter
-1 x Power Cable
-1 x Quick Start Guide
-Several Screws

Warm Tips:
- The performance will be limited if the host USB-C port standard is lower than USB3.2 Gen2x2.
- For 2.5'' hard drives, additional 2.5'' to 3.5'' mounting brackets are required (Not included).
- The HDMI port will not work if USB-C port on the host does not support video output or use the USB-C to A cable.
- Connect up to 3 products via Daisy Chain.
- Supports auto-sleep function, automatically sleeps after 15 minutes of no operation.
- When installing the hard disk, use screws for better stability.
- Does not support RAID array setup; configure separately if needed.
- If the SSD is brand-new and unformatted, please perform partition installation so that the computer
can read the data normally. If the SSD is formatted and has stored data, you have no need to perform
partition installation because the computer can read the data normally.