240mm Ultra-Thin Aluminum Radiator

Slim 22.5mm Profile — G1/4 Thread — 17 Flat Channels

Dual 120mm Fan Cooling in a Pencil-Thin Length17
Flat ChannelsG1/4
Universal Ports2x120mm
Fan SupportDual-Fan Cooling That Slips Into Slim ChassisA240mm aluminum radiator at only 22.5mm thick. Standard 240mm rads are 27-30mm — this one fits slim mid-towers, tight chassis, and server racks where clearance is measured in millimeters.Why You'll Love It📏Only 22.5mm Thin — Slim Chassis Ready

One of the slimmest 240mm radiators available. Fits tight mid-tower builds, slim cases, and rack systems where even 27mm rads won't clear.

💧17 Flat Channels — Full-Length Even Cooling

17 flat channels span the full 271mm core for even coolant distribution across both 120mm fan zones. No dead spots, no hot corners.

🔧Universal G1/4 Thread — Works With Your Fittings

Standard G1/4 (2-point) ports, flow direction doesn't matter. Compatible with all major barb, compression and quick-release fittings.

⚖Pure Aluminum — Light & Corrosion-Resistant

Baking-paint finished aluminum with oxidation resistance. Budget-friendly dual-fan cooling without the copper price tag.

⚠ Before You Install — Read This1. Screw length — critical:Screws must not extend more than5mminto the radiator mounting holes. Longer screws willpierce the internal water channels and cause leaks — NOT covered by warranty. Factory screws are matched for standard 25mm-thick fans (8x 6-32 x 31 imperial screws).2. Soft fins are normal:Fins are thin 0.2mm aluminum. Slight fin bending during shipping is normal andnot a quality defect— gently straighten with tweezers.3. Pressure:Recommended long-term operating pressure below1 bar.Buy With Confidence🏭Source Factory
Direct from of certifications✅Strict QC
4.9-rated service

Need dual-fan cooling in a slim chassis? This is the one.

Source Factory | Pure Aluminum | RoHS | Patented | Strict QC