This model has the same part number as other mod 1 monitors. Obviously installed in a modified TV cabinet. As shown there some scratches and apparently missing trim that covered the holes for the TV tuners. It is working with a nice raster. A few extra white lines at bottom of screen indicating very adjustment may be a little off and the raster edge is barely visible on the right side indicating either centering is slightly off or there is insufficient width. It’s only about an 1/8 “ so likely not a problem. It has been stored since the 1980’s so reliability is questionable. I’m surprised it came on at all and should considered “needs Repair” even if it currently working. I included a photo of the raster but camera sync caused a big black area that isn’t there with normal viewing. I set shipping and packing at $50. But could be less depending on shipping method and destination. Thanks for looking