PCIe To M.2 4G/5G And USB 3.2 HAT For Raspberry Pi 5, Compatible With SIMCom/Quectel 4G/5G Modules, Comes With 5G-4IN1-PCB Antenna, Raspberry Pi 5 HAT, High-Speed Networking PCIe TO M.2 4G/5G And USB3.2 HAT
Designed For Raspberry Pi 5, HAT+ Standard More USB Capability For Raspberry Pi 5
Compatible With Multiple SIMCom/Quectel 4G/5G Modules With M.2 Key B Interface
5G Standard 3GPP R15 3GPP R16 - 5G Sub-6 GHz Sub-6G & mmWave Sub-6 GHz - Applicable Region Global (except China) Global except Americas Americas Global Dimensions 30.0 × 52.0 × 2.3 (mm) 30.0 × 42.0 × 2.3 (mm) 42.0 × 31.4 × 3.8 (mm) FREQUENCY BAND 5G 5G NR - n257, n258, n260, n261 n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n79 n2, n5, n7, n12, n13, n14, n25, n30, n41, n48, n66, n71, n77, n78, n79 - 5G NR NSA n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 5G NR SA n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 LTE LTE-FDD B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 B2, B4, B5, B7, B12, B13, B14, B25, B26, B29, B30, B66, B71 B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD B34, B38, B39, B40, B41, B42, B43, B48 B38, B39, B40, B41, B42, B43 B41, B46, B48 B34, B38, B39, B40, B41 LAA B46 - UMTS WCDMA B1, B2, B3, B4, B5, B6, B8, B19 B1, B2, B4, B5, B8, B19 B1, B5, B8 B2, B4, B5 B1, B2, B4, B5, B6, B8, B19 GNSS GPS / GLONASS / BeiDou (Compass) / Galileo / QZSS (QZSS is not supported on RM502Q-AE) GPS / GLONASS / BeiDou / Galileo / QZSS DATA RATE 5G mmWave - downlink 4 Gbps;
uplink 1.4 Gbps - 5G SA Sub-6 downlink 4.2 Gbps;
uplink 450 Mbps downlink 2.4 Gbps;
uplink 900 Mbps downlink 2.4 Gbps;
uplink 500 Mbps - 5G NSA Sub-6 downlink 5 Gbps;
uplink 650 Mbps downlink 3.4 Gbps;
uplink 550 Mbps LTE downlink 2 Gbps;
uplink 200 Mbps downlink 1.6 Gbps;
uplink 200 Mbps downlink 1.0 Gbps;
uplink 200 Mbps downlink 150 Mbps;
uplink 50 Mbps UMTS downlink 42 Mbps;
uplink 5.76 Mbps Note: The 4G/5G module is NOT included, please purchase separately. The above are the supported modules after testing; If you need to use with other modules, please confirm with the module manufacturer for interface compatibility.
Multi-System Support
Comes With 5G-4IN1-PCB Antenna
Onboard Power Monitoring Chip And EEPROM
Supports Saving HAT+ ID And Product Information, Compatible With HAT+ Standard
Reserved Airflow Vent For Cooling Fan
How To Install
What's On Board
PCIe to USB 3.2 Gen1 HUB chip - for saving HAT ID and product information
- Power monitoring chip
- for connecting to the PCIe interface of Raspberry Pi 5
-
- for connecting Raspberry Pi 5
-
for installing Nano-SIM card - for 4G/5G networking of Raspberry Pi or PC via USB cable, firmware updating, or external power supply input
- for switching to use GPIO pins to control power on/off and reset of the module
- Press it to reset the module
- Power indicator
- Module Network status indicator
Pinout Definition
Application Scenarios Outline Dimensions Resources & Services
PACKAGE CONTENT
Weight:0.073 kg
