Wavlink 10 Full Gigabit Ports Switch with 8 PoE+, 2 Gigabit Ethernet Uplink, 120W Total PoE+ Ports Support 802.3af/at, Unmanaged Network Switch with VLAN, Default, Extend Modes, Wall and Desktop Mount
[Full Gigabit Ports Switch with 8 PoE+] This network switch is equipped with 10 Gigabit Ethernet ports and 8 PoE+ ports compliant with the IEEE 802.3af/at standard. Each PoE+ port supports both Gigabit data transmission and power delivery simultaneously over a single Ethernet cable. It is fully compatible with IP cameras, wireless AP, and other PoE devices, eliminating the need for additional power adapters and thereby simplifying the cabling and installation process.
[Total 120W PoE+ Switch] Build-in 120W high PoE output power, each PoE port can automatically detect and recognize IEEE 802.3af/at and each PoE port supports up to 30W output. Widely used in IP cameras, Wireless Access Point, IP Phone, Computer Networks, etc.., ensuring stable, high-speed network performance without latency or packet loss.
[Default, VLAN, Extend] Supports three smart modes: Default Mode, VLAN Mode, and Extended Mode. Default Mode enables seamless connectivity for office networks. VLAN Mode isolates ports to enhance network security and reduce signal interference, ensuring stable operation. Extended Mode extends the transmission distance to 250 meters, making it suitable for long-distance deployments, though signal strength will diminish with distance.
[Plug and Play] Plug and play for effortless setup—just connect the network cable and power supply to start using right away. It automatically recognizes connected devices with no complicated configuration required. Designed for flexible placement, it supports both desktop and rackmount installation to fit different deployment scenarios.
[Wide Application] Boasting a compact sturdy metal housing, clear LED indicator lights, and a high-performance fan with heat dissipation, this switch delivers reliable cooling and long-lasting durability. It works perfectly for a wide range of applications including IP cameras, wireless access points, IP phones, and office computer networking systems.
10 Port Full Gigabit Switch with 8 PoE Ports
This 10-port full gigabit switch features 8 IEEE 802.3af/at PoE+ ports with a total 120W PoE budget, supporting up to 30W per port and auto device detection. It offers three smart modes—Default, VLAN and Extend—to suit regular networking, port isolation and 250m long-range transmission. Plug-and-play design needs no complex setup, compatible with desktop and rackmount installation. Built with durable metal casing, LED indicators and efficient heat dissipation, it delivers stable lag-free performance and is ideal for IP cameras, wireless APs, IP phones and office network use.
LED Indicator
PWR (Green)
Off: No power supply. / On: Switch is powered on.
LINK/ACT (Green)
Off: No device connected. / On: Link established at 10/100/1000Mbps. / Blinking: Data is being transmitted/received.
PoE (Orange)
Off: No PoE device (PD) connected. / On: PoE power is being supplied successfully. / Blinking: PoE power supply is abnormal.
Safety Note
This device has a permanently connected protective ground conductor, which must be connected to the building’s grounding system by a qualified professional.
Mode
Default Mode: Standard gigabit PoE switch operation, with all ports communicating freely.
VLAN Mode (Isolation Mode): Ports 1–8 are isolated from each other for enhanced security, but can communicate with uplink ports 9–10.
Extend Mode (Monitoring Mode): Forces ports 1–8 to 10 Mbps for long-range transmission up to 250 meters.
Specification
- 8*up to 1000Mbps Ports compliant with IEEE 802.3at/af PoE standards.
- 30W Max Power Output on Each PoE Port
- 250m Ultra-Long Distance Data & Power Transmission
- Features three functional modes for switching: Default Mode, VLAN Mode, and Extend Mode
- Features port overload protection, short-circuit protection, and PoE port prioritisation
Attention
- Handle with care to protect precision components from impact or vibration. Upon receipt, inspect for damage or missing parts and contact support immediately if needed.
- Install in a dry, well-ventilated area with humidity below 90%. Keep away from corrosive gases and strong electromagnetic sources. Ensure adequate space around the unit and do not stack equipment on it.
- Use only certified three-hole sockets with proper grounding. Ensure the protective ground (PGND) wire is correctly connected.
- Do not open the chassis. Unauthorized opening risks severe electric shock and will void the product warranty. All repairs must be performed by qualified personnel only.
In the Box
1x Network Switch
1x Power Cord
1x Quick Start Guide
1x Installation package
