XGSPON ONU Stick with Free Fan, 10G SFP+ ONT with 8311 Firmware, SC/APC Tx 1270 nm Rx 1577 nm, for Mikrotik, Ubiquiti & More

Product sellpoints

• Certification:Compliant with EOCNES 105℃ standards, this ONU stick meets rigorous quality and reliability requirements.
• Performance:9.953G TX/9.953G RX with 3分贝 bandwidth, ensuring high-speed and stable data transfer.
• Compatibility:Designed for hot-plugging into 10G SFP+ slots, this ONU stick seamlessly integrates with Layer 2 Ethernet switches.
• Fiber Type:Single Mode Fiber Optic Transceiver for reliable and long-distance data transmission.
• Prx126 Sfp Pon|Transmission Distance:Cover up to 20km with the XGS PON SFP, ensuring robust connectivity for FTTB/FTTH/FTTO networks.

• Product Features

Product name：XGS PON STICK ONUMAC IC ：Maxlinear PRX126Product features：➢ 3.3V Power supply➢ Support 20km transmission distance with SMF➢ Support data encryption➢ Support VLAN function setting➢ Support software on line upgrading. ➢ Support fault alarm➢ Support dynamic bandwidth allocation➢ Support transparent multicast transmission➢ Support SC / APC or SC/UPC connector ➢ Complies with SFP+ MSA (SFF-8431)➢ Complies with RoHS
Standard:Complies with ITU-T G.987.2Complies with ITU-T G.9807.1, G.9807.2ITU-T G.988 OMCI L2 MAC Bridge (Up to 64 L2 bridges)G.8275/Y.1369/IEEE 1588v2IEEE 802.1ag and ITU-T Y.1731 Ethernet OAM delay & loss measurement hardware support
xgspon onu stick with bigger heat sink
Application:The XGS PON STICK optical module can fully comply the requirements of Telecom grade FTTB,
FTTH, and FTTO devices. It can be hot plugged into the 10G SFP+ slot of a layer 2 Ethernet switch
to work as an ONT, allowing the entire device to be directly connected to the XGSPON optical
network. The central OLT only needs to register the XGS PON STICK optical module like a regular
optical modem, and the communication device can complete the access switch from the original
P2P network to the PON network.1) Insert the XGS PON STICK module into the optical port of the switch or router and verify if it can be pinged;2)Login method: SSH login (Telnet method is currently not supported)The IP address of the STICK module is 192.168.1.1User name ：root
No password