tapirapeco Gigabit Fiber Optical Media Converter
Model HTB-GS-03 • SC Single Fiber Port • 1000Mbps
⚠️ Power Adapter Notice: This converter ships with an EU-standard power adapter (Input AC100-240V/50-60Hz). A US-standard plug adapter is required for use in the United States.Overview
This Gigabit Ethernet Media Converter transmits and receives 10/100/1000Mbps data over optical fiber via a single SC fiber port. The RJ-45 electrical interface auto-negotiates to 100Mbps or 1000Mbps, while the optical interface runs at a stable 1000Mbps rate. Built with a rugged, environmentally hardened design and clear LED status indicators for easy installation and troubleshooting. 🔌📡
Key FeaturesSingle Fiber SC Port
1*1.25Gbps full-duplex fiber port paired with 1*1000M Ethernet port for flexible network switches between 1000Base-T and 1000Base-SX/LX for hassle-free setup.
Low Power Consumption
Only 1.5W under full load with auto-negotiating low-power chips for stable long-term operation.
9K Jumbo Packet Support
Supports direct forwarding mode with reduced latency and data isolation protection.
Choosing Your Option
Both variations are the identical converter unit and differ only in the fiber transceiver module's maximum transmission distance:
With 3KM Module
Fitted with a 3KM-rated fiber transceiver module.
With 20KM Module
Fitted with a 20KM-rated fiber transceiver module for longer-range links.
Each unit includes one converter with external power adapter. A matched pair (1310nm A-side and 1550nm B-side) is required for a working single-fiber 10BASE-T, IEEE802.3u 100BASE-TX/FX, IEEE802.3z/ab 1000BASE-FX/TXFiber PortSC, 1310/1550nm, Single ModeRJ-45 PortAuto-MDI/MDIX, Gigabit EthernetMTUMore than 9036 bytesDimensions94 x 71 x 27mm (external power)Input VoltageDC5V2A (adapter input AC100-240V, 50-60Hz)Operating Temperature0°C to 70°CStorage Temperature-40°C to 85°CWeight0.5kg per pair (external power)Product ImagesFAQDo I need two units to make a link?
Yes, a matched pair (1310nm and 1550nm) is required to complete a single-fiber optical link.
Will this work on US power without an adapter?
The included power adapter is EU-standard. A US plug adapter is needed for direct use in the United States.
What's the difference between the 3KM and 20KM options?
Only the maximum fiber transmission distance of the installed module differs; the converter unit itself is the same.
