You may also like
952 955 Printhead for HP Officejet Pro 8710 8216 7740 7720 8720 8730 8740 8210
75.99 USD
Free shipping
Reufrbished Printer Print Head fit for PIXMA PRO9500 Mark II nozzle QY6-0077 UE
119.87 USD
Free shipping
Printhead fit for 10 Series ESP 3 5 7 9 5100 5300 3250 5210 5250 6150 9250 RL
23.87 USD
Free shipping
Replacement Printer Print Head QY6-0089 For TS5080 6020 6050 6051 TS6052 YU
38.87 USD
Free shipping
Full Color QY6-0078 Printhead Printer Head for MG6220 6140 6180 6100 6150 6200
38.87 USD
Free shipping
920 Printhead for HP 6500 6500A 7000 7500A E910A E710N B210A Print head CN643
26.87 USD
Free shipping
SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories
You may also like
Fiber Optic Glock Sights For Models 17 19 22 23 24 26 27 33 34 35 38 39 45
19.99 USD
Free shipping
Sheep Pig Dog Puppy Tail Cutting Tool Electric LiveStock Tail Docker Tail Cutter
31.87 USD
Free shipping
DC Brushless Cooling PC Computer Fan 12V 7025B 70x70x25mm 0.2A 3 Pin Wire UE
11.3 USD
11.89 USD
Free shipping
5%
off25/50/100 Grain Like Gold Tip FACT Arrow Weight Screw Combo 1dz .246 shafts FOC
10.33 USD
10.87 USD
Free shipping
5%
offWireless Surround Sound Bar 4 Speaker System BT Subwoofer TV Home Theater Remote
51.31 USD
Free shipping
Replacement Printer Print Head Fits e pson 1390/1400/1410/1430/1500W YU
Product Description
Replacement Printer Print Head Fits e pson 1390/1400/1410/1430/1500W YUReufrbished F173050 Printhead for performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
Product Condition : Original Refurbished Printhead ,95% New.
Warranty : One Year Free Warranty , Life-long Service.
Size:80x50mm
OEM code: Models:
for epson Stylus Photo 1390/1400/1410/1430/1500W
for epson Stylus Photo epson Stylus Photo RX560/RX580/RX585/RX590
for epson Stylus Photo includes:
1 x Reufrbished print head
Must read when buying nozzles:
The nozzle is the most core part of the inkjet printer. More than 90% of the effect and quality of the machine's image are determined by the nozzle. However, the nozzle is the most expensive and most easily damaged part of the inkjet printer. Because of these particularities, the manufacturer has done a variety of harsh tests before the nozzle leaves the factory, and there will be no quality problems.
The nozzle is fragile and expensive, please inspect the goods in front of the courier, if you find any crushing or abnormality, please contact us in time and reject the goods!
〔Maintenance is a technical job. If you don’t know the technology, there is a big risk. After confirming the problem, replace the nozzle and install it carefully. Otherwise, the main board and the nozzle will be burned. Please operate carefully! There are many things to pay attention to on the nozzle, so blind replacement by non-professionals is likely to cause damage, so there is a regulation in the industry that the nozzle is not guaranteed, delicate items, please do not try the machine, please be careful. If you are not familiar with the machine, it is recommended to send it to a maintenance station or find a professional to replace the nozzle, so as to avoid unnecessary loss and trouble.]
Technical Breakdown:
Before the nozzle of the machine was broken, especially if the ink leaked, some of them would burn out the motherboard, so replace it with a new one.
Before the nozzle, the main board must be eliminated, and the main board insurance F1 and F2 can only be replaced with original ones.
For the same insurance, the pair tube can only be replaced with the original one of the same model, and the insurance with high current value or a different type of pair tube can be replaced.
Tubes are likely to burn the nozzle and the main board.
Therefore, everyone must do the following work before purchasing the nozzle:
1. If the machine reports an error (that is, the red light flashes when it is turned on), it may not be that the nozzle is broken. It may be that there is a problem with the frame or the main board. In this case, please solve the error problem before buying the nozzle.
2. Both the main board and the nozzle are burnt out, you need to replace the main board first, and then check the nozzle!
3. Is there any sign of splitting, corrosion or burning of the data cable? If the data cable is broken or not plugged in place, it will burn the nozzle and the main board. Please be sure to check the data head cable!
4. For customers whose machine is too old, for example, there is a lot of ink in it, and the machine is very dirty, it is recommended not to change the nozzle, it is best to change the machine directly! In order to avoid buying a nozzle and then installing it, saying that the effect is not good or something, it is very troublesome. And it's not worth repairing!
5. It is recommended that you confirm whether the quality of your ink cartridge or ink or continuous supply is good. The continuous supply that has been used for a long time, the dirty continuous supply that spills a lot of dust and ink everywhere is recommended to replace it with a new one. The continuous supply of good quality, this is responsible for me and you! Solve big problems for a little money! And there is so much ink in the new continuous supply! It's worth it!
6. Please do not tear up the warranty label with the company's name on each nozzle (please do not disassemble the nozzle by yourself), otherwise there will be no warranty and no return or exchange!
Precautions when changing nozzles:
1. After receiving the nozzle purchased in our store, I used a needle to inject water to check the nozzle when I went back to see if it was clogged. This is a very redundant and dangerous method. The original nozzles are equipped with protective fluid, which can ensure that the nozzles will not be blocked within one or two years. After the nozzles are received, do not wipe off the protective fluid on the nozzles. Do not use a syringe to inject the nozzle, it may cause the ink sac to rupture and print cross-color! For your rights, please know! Use of this method results in damage to the print head without warranty! First of all, once the nozzle is in the water, you can turn on the machine without drying it, and it will burn the board if it is light, or burn the head if it is serious; secondly, the nozzles sold in our shop are shipped after strict inspection and testing, and are protected If you use a needle to inject water into the head, not only will the protective liquid in the head be washed away, but also because the pressure of the hand is too high, it is easy to cause the nozzle to be blocked, resulting in no ink;
2. The head surface of the nozzle is very fragile and must not be bumped, so it must be protected. Its outer layer is a block of aluminum, and the inner layer is coated with a crystal oscillator and very small ink tubes. It will be dented, deformed, or even broken when touched, and the nozzle will be scrapped;
3. Be careful when installing the nozzle. Be sure to cut off the power first and install it in place. After installation, gently push the car to move left and right with your hands to check whether it is smooth. Do not turn on the power immediately after installation, because if the head is not in place, the car will easily break the head when it moves, and the human hand can feel it and retract it freely. , strong controllability;
4. When connecting the plug cable, do not bring ink, and make sure that it is in good contact with the socket and does not touch the pins, otherwise, the nozzle will be short-circuited and burned;
5. The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not add oil directly to the shaft. Excess oil will flow to the nozzle and cause damage;
6. After the machine and circuit are correct, it is necessary to check the water circuit. First, check whether the water in the ink cartridge is sufficient or not; secondly, check whether the small cleaning blade and the ink suction pump are dirty
7. There will be air in the newly installed nozzle, so it will not print normally immediately. Only when the air in the nozzle is completely exhausted can the lines be aligned normally; first, it can be cleaned intermittently (only 2 times at a time, and then stop for 30 minutes. Then wash it 2 times) Repeated over-cleaning will cause the cleaning pump to accumulate ink, which will not only cause printing color mixing, ink leakage, but also waste ink; secondly, you can print more pictures to let the nozzle discharge air during work; Thirdly, if the machine has led out the waste ink tube, you can turn off the power first, and then use a rubber tube with a syringe to draw out the waste ink tube until 3-5ML of ink is drawn out, then turn on the machine and clean it once with the machine normally, which is equivalent to Artificially sucking out the air in the head, the side effect is that it is easy to cause the cleaning pump to pile up ink.
- About Us
- Payment
- Shipping
- Terms
- Contact Us
About Us
Founded in 2012, VIPJQ have professional development and sales, and are involved in various products, providing customers with various high-quality products.
Since its establishment, VIPJQ has always adhered to the service concept of "customer first" and the management concept of "pursuit of quality",
and is committed to providing customers with high-quality original designs.
We commit to provide you the best innovative, quality products & professional services with competitive prices.
We value every customer, and we look forward to providing solutions for your business needs to help your business achieve its goals, please contact us immediately! We are all about you!
Payment 1. We Accept Visa, Master, Amex, Google Pay，Discover, Paypal, etc, many payment ways.
2. Item will be shipped immediately on the same or next business day of receiving your payment. Shipping
US Buyers
Parcel will ship via USPS/DHL/FedEx from our United States warehouse
Shipping time
The item usually will be dispatched within 3 days after you ordered.
And it usually takes 3-10 working days to delivery depends on buyers' address or other majeure on the stand behind everything that we sell and will do everything possible to assure you are satisfied
Terms
When you receive your purchase if you are not 100% satisfied, please sent me message and we will do our best to meet your expectations. If you still want to return your purchase, simply ship the item(s) back to us and we will refund your original purchase price and the original shipping charge.We must be notified of the intent to return your item within 30 days of receiving the item.
How to return
1. Please ask us for return address .
2.Shipping back the package .
3.Sent us the return tracking number.
4. Refund full to you when we receive the package.
Contact Us
We can be contacted at any time through messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out!
Please give us a chance to resolve the issue before leaving us a response.
Copyright © 2022 Tongtool
