Description ✨Please note: The voltage of this product is 110V and does not include the motor part
The machine is equipped with a 2.5mm nozzle by default.
The single-screw plastic extruder is one of the core pieces of equipment in the plastic processing field. Its primary function is to continuously extrude solid plastic raw materials (such as granules and powders) into plastic products or semi-finished products with specific cross-sectional shapes through the rotation of the screw, which involves heating, melting, kneading, and pressurizing the materials.
✨[ Three Heating Coil ]
Voltage: 110V
Power: 200W*3
Heating method: Heating coil
Screw sleeve outer diameter: 30mm
Total length: 300mm
Inlet diameter: 28mm
Screw output shaft diameter: 15mm
Nozzle aperture: 2.5mm
Screw diameter: 20mm
Screw length: 330mm
✨About Installation:
1. Thermostat: K-type
2. Recommended Motor: Speed greater than 50 rpm, power greater than 200 W, and torque greater than 15 Nm
✨Instructions:
1. This product has a temperature resistance of no more than 300°C/572℉. Do not use without temperature control. Never use at temperatures exceeding 300°C/572℉.
2. When installing the coupling, ensure the screw and motor shaft are aligned to prevent deviation and screw damage.
3. Never start the machine cold. Ensure the sleeve temperature reaches the material melting point before starting. Do not overfill the machine during initial use to avoid excessive screw resistance and possible screw jamming.
Product Highlights ✨This is the filament extruder accessory with a single-shaft screw, 3 pieces 110V heating coils and a hopper
✨3 pieces 200W ceramic heating coils, fast heating and easy wiring for diy plastic extruder machine
✨45# steel screw, high temperature resistant, can be used within 572℉. Applicable to extrusion of PE PP PS PVC POM PA PC ABS PET and other materials
✨It's the main accessory of the screw extruder. You need to prepare a K-type temperature controller and a motor with a speed greater than 50rpm, a power greater than 200W and a torque greater than 15 Nm. You can easily assemble your own 3D filament extruder
✨The equipment is compact and designed for experimental research, small batch testing, 3D consumables extrusion molding, etc. Package includes ✨1x 3D Filament Single Screw Extruder Payment Shipping Returns Contact Us 1. All payments must be prepaid.
2. We only accept payment via Paypal. Please kindly check if you can do the payment via PayPal before placing an order, Payment must be received within 7 days after order is made. 1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.) 1. We offer 30 days money back guarantee return policy.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. Dear friend: Welcome to me my services are available: Monday To Friday: 9:00 to 18:00.
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and considerable to give us a little more time.
2. Please contact us with message if we made a deal on . E-mail is often filtered as spam.
3. Please wait for our reply to your email, we will do our best to help you solve the problem. ✨[ Three Heating Coil ]
Voltage: 110V
Power: 200W*3
Heating method: Heating coil
Screw sleeve outer diameter: 30mm
Total length: 300mm
Inlet diameter: 28mm
Screw output shaft diameter: 15mm
Nozzle aperture: 2.5mm
Screw diameter: 20mm
Screw length: 330mm
✨About Installation:
1. Thermostat: K-type
2. Recommended Motor: Speed greater than 50 rpm, power greater than 200 W, and torque greater than 15 Nm
