DT R48SF M.2 NVMe to PCIe x8 Extension Cable PCIe 3.0 Gen3 32Gbps Custom Length 3~100cm For SSD Network Card
Product Description
ADT Factory Direct Supply, fully 100% power-on tested before shipment, excellent performance with great reputation.
Brand: ADT
Model: R48SF (R48 Series)
Product Name: M.2 NVMe to PCI-E X8 Adapter Extension Cable
Cable Length: 3cm to 100cm, custom length available
Bandwidth: PCIe3.0 x4 Gen3, up to 32Gbps
Product Function
This extension cable adapts PCIe x8 cards such as network cards, storage SSDs, to connect into the M.2 NVMe slot on your motherboard.
Purchase Notice: This item is intended for purchase by professional engineers only. It is NOT suitable for regular general use. Regular buyers please DO NOT purchase.Procurement Tip: Please order 1~2 samples for verification test before bulk purchasing.Friendly Reminder: This product has many compatibility risks. Incorrect assembly or improper operation may burn out your hardware. Customized item, non-refundable & non-returnable. Please confirm fully before placing your order.
Length Explanation
The listed cable length refers only to the flexible cable section, PCB boards and connectors are excluded. PCB + connectors add approximately 4cm extra total length. For example, an 8cm cable will have an overall total length of around 12cm.
Accessories
SATA power adapter cable included with every package. Must connect the SATA power cable to get 12V power supply.
Product Advantages
- Premium Cable: Imported German patented cable & Taiwan imported connectors, stable full-speed PCIe3.0 8Gbps per lane transmission.
- Customizable Length: Custom length available from 3cm up to 100cm. Low impedance cable, full PCIe3.0 speed supported for lengths ≤60cm.
- Differential Signal Via-less Design: Eliminates signal attenuation & interference caused by parasitic capacitance/inductance, no CAF micro-short circuit, long service life.
- High-Grade PCB Material: Precision PCB fabrication, 1oz thick copper layer. Gold-plated fingers with sufficient gold thickness for excellent conductivity. Reduces blue screen & system crash issues caused by oxidation and rising impedance.
- Reinforced Soldering Joints: 3mm thick PCB pads protect metal solder points, secured with screws and hex lock nuts. Tear-resistant, anti-interference, prevents broken wires or pad lifting. Cable is bendable without performance impact.
- Low-profile & Enlarged PCB Design: Low profile design avoids GPU interference. Enlarged & lengthened PCB for easier installation and lower damage risk.
FAQQ: What about cable quality? Is it shielded?
A: No metal shielding. It adopts advanced EMI shielding conductive polymer, flat cable design. The conductive polymer fully covers each cable to block EMI ingress and emission, minimizing interference and performance degradation while reducing extender weight.
Q: Cable thickness? Is it flexible? Can it bend?
A: Cable thickness: 1.4mm. It is relatively stiff but bendable, no impact on functionality.
Important Buying Warnings
- Correct Orientation Required: Always check the connector direction before plugging. Reverse or offset insertion will destroy your hardware. Hold the socket firmly while inserting, avoid excessive force breaking pins. Do NOT bend or pull the cable within 2cm of soldering joints on both ends.
- Signal driving capability varies on different motherboards & hardware. Our lab test results cannot guarantee identical performance on your setup. Signal loss is unavoidable with extension cables. Do not buy if you require perfect zero-loss performance.
- Electronic hardware like GPU/motherboard oxidizes and ages over time. Using extension cables will further reduce stability. NOT compatible with equipment older than 4 years old.
- Reserved for professional engineers for hardware testing purposes only. Not recommended for other use cases.
