Features:
2.4G, Max. 3000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Small size, Safe & Power saving;
Full kit, easy to install;
For house, office, UAV, IP cameras, RC equipment;
Technical specifications
Model: SH24BTA-N
Operating range: 2400~2500MHz
Channel width: 20Mhz&40Mhz
Supported standards: IEEE 802.11b/g/n
Operation mode: Bi-directional, half-duplex, time division duplex
Connector : To radio SMA female (hole inside). To antenna RP-SMA (pin inside)
Output power: 3000mW (35dBm)
Input power: 0 ~ 20dBm
Transmit gain: 15 - 18dB
Receiver gain: is less than or equal to 12dB
Noise figure: = 3.5dB typical
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20 to +70 degrees degrees
Operating humidity: Up to 75% relative humidity
Material: Cast aluminum
light: Power status and activity status
weight: 94g
size: 8.4 x 4.7 x 1.7cm
Package weight: 380g
Package size: 21.3 x 13.5 x 5cm
Package :
1 x SH24BTA-N Wifi Signal
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x power supply (/EU Plug)
1 x user manual
Attention:
The power amplifier is not suitable for use in high power devices
Use
Step 01: Remove the Antenna from the Wireless Router (Access Point).
Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V.2.4Ghz frequnecy band, Max. 3000mW (35dBm) output power; Low noise, High Gain, High Performance; With Power and Signal Activity Indicators; Aluminum-alloy case by CNC, anti-interference; Small size, Safe and Power saving; Full kit, easy to install; For house, office, UAV, IP cameras, RC equipment, etc
Which works together with an indoor Wireless Access Point to improve its operation range and performance. In certain conditions the unit is able to double the range of the wireless device. Full power, easy installation and operation; Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication; Save wiring costs, easily build a wireless infrastructure for home or business use; Make broadband wireless application in possible coverage
Maximum output power of 3000mW by the . The input power range for this model is 0 - 20dBm, around 10-13dBm is the best. Too low input power, the output power of will be low or does not work, if too high(near to 20dBm or up), the just as a connection device, does not work, but will weak the signal because of signal attenuation
SH24BTA-N WiFi is an indoor solution 3000mW (35dBm) bi-direction designed for 2.4GHz IEEE 802.11b/g/n wireless LANs. Transmit gain: 15 - 18dB, Receiver gain: ≤12dB, This unit comes with an easy plug-and-play installation
Package Contents: 1 x SH24BTA-N wifi ; 1 x RG316 cable with SMA connectors (20cm); 1 x 6dBi omni antenna; 1 x power supply; 1 x English user manual
