Ruckus R710 (x2) + R510 (x1) Wireless Access Points — Ruckus Unleashed Firmware USED — tested, working great, factory reset and ready to install. You must power via POE. WHAT YOU GET • 2x Ruckus R710 — 802.11ac Wave 2, 4x4:4 dual-band indoor access point • 1x Ruckus R510 — 802.11ac Wave 2, 2x2:2 dual-band indoor access point • Printed quick-start guide included (factory reset, first setup, adding the other APs) RUCKUS UNLEASHED — NO CLOUD, NO FEES, NO CONTROLLER These run Ruckus Unleashed firmware. That means no controller appliance, no cloud account, no licenses, no subscription — ever. Any AP can be the "master," and additional APs join the network automatically with zero configuration. You can have your whole Wi-Fi up in about 10 minutes with the built-in setup wizard. SPECS R710 (x2): • 802.11ac Wave 2, 4x4:4 MU-MIMO, dual-band (2.4 + 5 GHz), up to 1733 Mbps on 5 GHz • Two 1 Gbps Ethernet ports • Ideal for high-throughput, higher-density coverage R510 (x1): • 802.11ac Wave 2, 2x2:2 MU-MIMO, dual-band (2.4 + 5 GHz), up to 867 Mbps on 5 GHz • One 1 Gbps Ethernet port • Ideal as a smaller-room AP or an add-on to extend the same network POWER PoE powered from your switch or PoE injector. No power adapters are included. (R710 performs best on PoE+ / 802.3at; the R510 runs fine on standard 802.3af.)